MULTI-PURPOSE PU FOAM

Multi-purpose aerosol polyuretane foam. The main purpose of the foam is filling, sealing gaps, installation, heat and sound insulation. Resistant to humidity and mildew.

  • Product Code: AS-30
  • Packing: 600gr; 820 gr x16 pcs/box
  • Shelf Life: 12 months

Multi-purpose aerosol polyuretane foam. The main purpose of the foam is filling, sealing gaps, installation, heat and sound insulation. Resistant to humidity and mildew.

  • Product Code: AS-30
  • Packing: 600gr; 820 gr x16 pcs/box
  • Shelf Life: 12 months

SPECIFICATIONS

  • Adheres very strongly and fills thoroughly.
  • Does not shrink.
  • Limited expansion
  • Fast cure
  • Semi-flexible structure
  • Dried foam can be trimmed, sandpapered and painted over.
  • Provides heat and sound insulation.
  • Does not sag on vertical surfaces

APPLICATION AREAS

  • For perimeter sealing of window and door frames.
  • For filling holes, cracks and gaps in buildings for insulation.
  • For filling penetration gaps of installment pipes like gas, water and electricity.

TECHNICAL INFO

  • Density: 24-28 kg/m3
  • Yield: 35-45 liters/1000ml
  • Fire rate: (DIN4102): B3
  • Shrinkage: 5% max
  • Expansion: 150-200%
  • Tack-free: 10-12 minutes
  • Cutting time: 35-45 minutes
  • Color: Light yellow

APPLICATION METHODS

  • Take out the single straw and attach to the valve by twisting.
  • Shake the can vigorously.
  • Moistening application surfaces would accelerate the curing speed and would have a positive effect on cell structure, yield and adhesion strength.
  • While the can is upside down, press the trigger for the foam to come out.
  • Since the foam would expand up to 200 % depending on the environment and surface humidity, fill the gaps partially.
  • From time to time, shake the can again during the application.
  • Clean the valve with an acetone like solvent for the next use.