Information
- GM174 is pale orange coloured, general purpose gasket maker in the form of thick paste.
- Fills the gaps between two parts and closes like a flexible gasket.
Pale orange coloured, general purpose gasket maker in the form of thick paste.
Fills the gaps between two parts and closes like a flexible gasket. Provides impermeability at low pressure even right after the application.
Typical Applications: Fuel and water pumps, bearing boxes, engine thermostats, air compressors, pumps in various combinations, fuel tanks, etc.
Can be used on other gaskets. Flexible and non-dripping.
Vibration-resistant.
Features and Applications
Features
Application
Usage and Instructions
Application
1) Clean surfaces before assembly. If possible use sandpaper before cleaning.
2) Apply the adhesive to both surfaces.
3) Roller or brush can be used to apply adhesive
4) Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
5) For disassembly, use hand tools to remove mating parts.
6) When it is hard to dissemble at room temperature, apply local heat until reaching 150°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
Technical Details
Average handling time: 15 min.
Colour: Pale orange
Corrosive: Non-corrosive
Flash Point: >93°C
Gap Filling: up to 0.5mm
Shelf Life: 24 months
Specific Gravity: 1.08
Temperature range: -50°C to +150°C'ye
Viscosity: 60000 - 100000 cPs (@2.5 rpm)
CODE | AGM-174 | AGM-174 | AGM-174 |
NAME | GM174 | GM174 | GM174 |
PACKAGING | 50 ml | 250 ml | 50 ml Pump |
ITEMS PER BOX | 12 | 9 | 12 |
ITEMS PER PARCEL | 72 | 54 | 72 |
ITEMS PER PALLET | 5760 | 1620 | 5760 |