Information
General purpose, high strength thixotropic anaerobic threadlocker.
- Provide resistance to vibration
- Removable when heat applied.
Locks studs, nuts, and bolts up to 1" (25mm) in size.
Used on engine studs, cylinder block joints, water pump couplings, and white goods industry.
Usage and Instructions
Application
1) Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
2) Apply the adhesive with a 360 turn to leading first three threads of the male and female fittings.
3) Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
4) Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
5) For disassembly, use hand tools to remove mating parts.
6) When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
Technical Details
Colour Green
Corrosive Non-corrosive
Flash Point >93°C
Gap Filling up to 0.15mm
Shelf Life 24 Months
Specific Gravity 1.040
Temperature range -50°C to +150°C
Viscosity 3000 - 4000 cPs (@20 rpm)
Package Size
|
CODE |
BTL-070 |
BTL-071 |
BTL-072 |
|
NAME |
TL 370 |
TL 370 |
TL 370 |
|
PACKAGING |
15 ml |
50 ml |
250 ml |
|
ITEMS PER BOX |
24 |
10 |
6 |
|
ITEMS PER PARCEL |
144 |
120 |
36 |
|
ITEMS PER PALLET |
8640 |
4320 |
1296 |
