FIXING FOAM
High-yield and durable polyurethane foam formulized specifically for mounting applications. From a 750 ml can content it yields up to 40 liters of foam. As a single component foam, it hardens within hours and reaches to a cuttable semi-rigid form by reacting with the humidity in the air. Can be used both indoors and outdoors. Enables heat and sound insulation, prevents energy loss.Each aerosol can comes with a single use complimentary glove.
- Product Code: PMF-220
- Gross Weight: 860gr
- Volume: 750ml
- Shelf Life: 15 months
- Yield: 30-40 liters/1000ml
-
SPECIFICATIONS
- High yield – more door and window installation.
- Low-expansion – does not apply excessive pressure on surfaces, does not bend frames.
- Pleasant snow-white color.
- Fast drying – reaches to cuttable form fast.
- Excellent stability – does not shrink.
- Does not runoff from vertical surfaces.
- Hardened foam can be sandpapered and painted over.
- Adheres very strongly on building materials.
- Sticking and blockage resistant guaranteed valve.
- Ergonomic application straw.
- Can be applied at temperatures as low as + 10°C.
APPLICATION AREAS
- Fixing window and door frames to walls.
- Panel, painting, air conditioning and air vents mounting applications.
- Mounting bathtubs to the floor.
- Mounting of PVC and woodwork.
- Bonding and insulation applications on common building materials.
TECHNICAL INFO
- Density: 23-32 kg/m3
- Yield: 30-40 liters/1000ml
- Fire-class: (DIN4102): B3
- Shrinkage: 3% max
- Expansion: 130-180%
- Tack-free time:: 8-10 minutes
- Cutting time : 30-40 minutes
APPLICATION METHODS
- Take out the straw out off the lid and attach it to the valve by twisting.
- Shake the can vigorously.
- Moistening application surfaces would accelerate the drying speed and would have a positive effect on cell structure, efficiency and adhesion strength.
- While the can is upside down, press the trigger for the foam to come out.
- Since the foam would expand, partially fill the gaps where you would apply.
- From time to time, shake the can again during the application.
- Leave the straw on the can for the next application; otherwise clean the valve with a solvent like acetone.
