ADHESIVE SEALANT
One-component, multi-purpose, elastic polyurethane adhesive and sealant. Following to application, it reacts with ambient humidity to form a durable and tough rubber seal.
- Product Code: PMP-755
- Gross Weight: 435 gr
- Volume: 310ml
- Shelf Life: 12 months
- White, grey, black
SPECIFICATIONS
- Medium shore A hardness and high strenght
- Functions both as adhesive and sealant.
- Non-shrink
- Strong adhesion on metal, glass, wood, concrete, brick, tile.
- Overpaintable.
- Suitable both for indoor and outdoor applications.
- Suitable for light and medium traffic
APPLICATION AREAS
- Sealing and bonding applications in vehicles.
- In production and installment of vehicle bodies.
- Elastic adhesion of wood, plaster board, metal, brick etc materials.
- Sealing applications in static joints.
- In roofing applications
TECHNICAL INFO
- Density: 1,23 gr/ml
- Extrusion rate: 270gr/min
- Shore A Hardness: 35-40
- Tack-Free time: 25-45 minutes
- Curing rate: 2-3mm/day
- Shrinkage <%5
- Elongation at break> %250
- Elastic Recovery > %95
- %100 Modulus: 0,6 N/mm2
- Application temperature: Between +10 ile +40C
- Service temperature: Between -20C ile +90C
APPLICATION METHODS
- Application surfaces must be clean and dry. Remove all dirt, oil grease, detergents and loose material. Mask smooth surface to simplify clean up. Common construction materials do not need primer application.
- Cut tip off cartridge. Cut nozzle to desired size at 45C angle. Insert cartridge into caulking gun. Push sealant ahead for uniform bead.Joint width must be between 6-25mm. Tool within 15 minutes with joint nail or putty knife. Clean off excess sealant with EMK or toluene before it gets dried.
