SANITARY SILICONE-EASYPACK
Easypack Sanitan is a neutral curing kitchen-bathroom silicone which does not contain solvents. With its special packaging, no application gun is neccessary in applications.
- Product Code: PMS-960
- Volume: 200ml
- Color: Translucent
SPECIFICATIONS
- Does not require silicone gun, by using the adaptor on the package it can be easily applied
- Resistant to moisture, mildew ang fungus
- Adheres strongly to common building materials
- 100% silicone, does not lose volume
- Can be used on acid sensitive surfaces since it cures neutrally
- No risk of the silicone to harden after usage; can be used over and over again
APPLICATION AREAS
- Water tightness around shower cabins, bathtubs, sinks, etc.
- On joins of tiles coming in water
- On polyester, acrylic, PVC surfaces of shower cabins, bathtubs, sinks, etc.
- Water tightness applications on high humidity environments such as saunas, pools, kitchens and bathrooms
TECHNICAL INFO
- On products adjoining sanitary systems
- Curing: Single component oxime
- Density: 1.03 gr/lt
- Non-sticking Period: 15 minutes
- Drying Period: 3 mm/day
- Flow Rate (fluidity): 350 gr/minute
- Shore A Hardness: 19
- Elongation at Break: 370%
- Operating Temperature: Between -40C and +180C
- Application Surface Temperature: Between +5C and +40C
APPLICATION METHODS
- Break and take off the plastic pin of the adaptor
- To adjust the flow speed, turn the adaptor to min-max directions
- Apply the silicone by pressing the adaptor
- For larger wall joins, you may cut the nozzle to get thicker silicone
- Do not forget to put the grey cap back on after finished using
