Marine Glue
One component polyurethane based adhesive with excellent adhesion on wood, metal,concrete, stone and several plastics substrates.
- Product Code: MPA-170
- Gross Weight: 500gr
- Shelf Life: 12 months
- Color: Amber
SPECIFICATIONS
- Excellent adhesion to wood, metal, concrete and several plastics.
- Transparent (amber color)
- Suitable for indoor and outdoor applications.
- Gap filling property with limited expansion.
- Exteremely resistant to water, moisture and weather conditions.
- Meets D4 criteria (according to DIN EN 204 standart)
APPLICATION AREAS
- Adhering almost all types of wood surfaces with each other; with metals; with some plastics; with stones, bricks and concrete.
- Adhering wooden construction materials and their repairs
- Furniture and boat production
- Fixing of raised flooring laying in combination with mechanical fixtures.
- All bonding applications that need a high water resistance.
TECHNICAL INFO
- Viscosity (20°C): 6.000 – 8.000 cps
- Density: 1,10 gr/ml
- Open time (20°C): 40 minutes
- Pressing Period (20°C): 4 hours
- Solid Content Ratio: 95%
- Service Temperature: Between -15°C and +100°C
- Application Temperature: Between +10°C and +30°C
- Color: Amber Color
APPLICATION METHODS
- Applications performed below 5°C will not yield high enough performance in adhering.
- Adhered surfaces should be clean and free from grease and dust.
- Especially when adhering surfaces which do not contain or do not emit humidity, the surfaces are recommended to be dampened approximately 5% water compared to the amount of adhesive used.
- The adhesive should be applied as a thin layer only to one of the surfaces which will be adhered.
- Surfaces should be put together and pressed before the open time of the product expires.
WARNINGS
- Cleaning the application surfaces from dirt, dust and oil will improve the adhesion performance
- Bonding materials must be pressed minimum for two hours.
- Curing time will be retarded in temperatures below +5C
- Full cure can take up to 1 day, during this period bonding parts must be handled by care.
-
Does not bond plastics as PE, PP, nylon and Teflon
SAFETY INFO
- It contains diphenylmethane -4, 4 diisocyanate. If inhaled for long periods, it may cause sensitivity on respiratory organs. If the wet foam contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Completely dried out PU adhesives does not carry risks to human health or to the environment.
